Burnishing One Blade Adjustable Reamer

RECOMMENDED BLADE GEOMETRY B-1 Max. Depth of cut 0.25 on Dia. For all materials, cutting Speed 70 m / min. B-2 Max. Depth of cut 0.25 on Dia. For all materials, cutting Speed 70 m / min. B-3 Max. Depth of cut 0.25 on Dia. This geometry produces very good surface finish in C.I. and in Steel. Cutting speed in C.I. max. 20 m / min. in, steel max. 15 m / min. B-4 Max. Depth of Cut 0.15 on Dia. For all materials max. feed rate limited to 0.1 to 0.2 mm / rev. Only used for blind holes.   CHANGING THE BLADE AND SETTING SIZE 1. Turn upper and lower adjusting screws one complete revolution anti-clock wise 2. Release clamp Turn clamping screws one complete revolution anti-clockwise 3. Using two allen keys for opening and tightening the clamp will be easy 4. Remove blade, clean blade slot 5. Turn the blade over or insert new blade 6. Press blade firmly against adjusting screws and the rear stop-pin. Tighten clamping screw 7. For rough adjustment, turn the upper and lower adjusting screws clockwise 3/4 th revolution 8. For accurate measurements a sensitive indicating micrometer is recommended 9. Check upper and lower setting dimensions (back taper approx 0.01 mm) 10. Setting fixture is recommended for quick and accurate size setting.

Back

[ Self Aligning Machine Adjustable Reamers ] [ Super Spade Drills ]